Our NEON Powder Sample Set contains 6 different neon colours- your choice of 2 gram resealable pouches (total weight of 12 grams) or 4 gram resealable pouches (total weight of 24 grams). Colours include INTENSE: Neon Blue, Neon Green, Neon Orange, Neon Pink, Neon Yellow & Neon Purple. All colours may be used in M&P and CP soaps, and epoxy resin. See information below for other approved uses.
Neon Blue Information & Approved Uses:
- INCI: Polyester-3, Ultramarine Blue
- Particle Size: 1-2
- Mixes In: Oil, Water, Glycerin, Alcohol
- Uses:
- Lip Products-No
- Eye Products-No
- Bath Water-No
- Nails-Yes
- Migrates-No
- MP Soap Only: No
Neon Pink Information & Approved Uses:
- INCI: Polyester-3, Red 28
- Particle Size: 1-2
- Mixes In: Oil, Water, Glycerin
- Uses:
- Lip Products-Yes
- Eye Products-No
- Bath Water-Yes (Use Poly 80)
- Nails-Yes
- Migrates-No
- MP Soap Only: No
Neon Purple Information & Approved Uses:
- INCI: Polyester-3, Manganese Violet
- Particle Size: 1-2
- Mixes In: Oil, Water, Glycerin
- Uses:
- Lip Products-Yes
- Eye Products-Yes
- Bath Water-Yes (Use Poly 80)
- Nails-Yes
- Migrates-No
- MP Soap Only: No
Neon Orange Information & Approved Uses:
- INCI: Polyester-3, Yellow 5
- Particle Size: 1-2
- Mixes In: Oil, Water, Glycerin
- Uses:
- Lip Products-Yes
- Eye Products-Yes
- Bath Water-Yes (Use Poly 80)
- Nails-Yes
- Migrates-No
- MP Soap Only: No
Neon Yellow Information & Approved Uses:
- INCI: Polyester-3, Yellow 5
- Particle Size: 1-2
- Mixes In: Oil, Water, Glycerin
- Uses:
- Lip Products-Yes
- Eye Products-Yes
- Bath Water-Yes (Use Poly 80)
- Nails-Yes
- Migrates-No
- MP Soap Only: No
Neon Green Information & Approved Uses: This product is NOT APPROVED for cosmetics, but can be used in craft projects, and in detergent-free soap.
- INCI: Polyester-3, Pigment Green 7
- Particle Size: 1-2
- Mixes In: Oil, Water, Glycerin
- Uses:
- Lip Products-No
- Eye Products-No
- Bath Water-No
- Nails-No
- Migrates-No
- MP Soap Only: No
When mixing our Intense Neon Pigment Powders with two part epoxy resin:
1. Mix the desired amount of powder with a small amount of the Part A (resin) and combine THOROUGHLY. This will create a "base" and prevent clumps and speckles.
2. Add this "base" to the remainder of your measured Part A (resin) and stir.
3. Combine with the measured Part B (hardener) and stir per brand directions. ***NOTE-The "base" you created is included in the calculated total weight of Part A (resin).